How to Replace Insoles in Tari II Sandals
By Barefoot Shoes | Minimalist Footwear | Xero Shoes | Published: 2026-10-23
Category: How-to Guides
Learn how to swap the insoles in your Xero Shoes Tari II sandals for a custom fit or to refresh worn padding. Step-by-step guide with common mistakes to avoid.
Quick answer
You can replace the insoles in Tari II sandals by removing the original footbed, selecting a compatible minimalist insole, and trimming it to fit the sandal's shape. The side zipper and adjustable buckle make access easy.
Why replace the insoles?
Over time, the original footbed may compress or lose grip, especially if you wear the sandals daily. Swapping in a fresh insole can restore cushioning and arch support without buying new sandals.
Some wearers prefer a different thickness or material for their minimalist sandal insole. A thinner insole gives more ground feel; a thicker one adds comfort for longer walks.
What to look for in a replacement insole
Choose an insole that is thin enough to fit under the straps without raising your foot too high. Most minimalist insoles are 3-6 mm thick.
The insole should be cuttable so you can trim it to match the Tari II's unique shape. Avoid rigid insoles that won't conform to the sandal's curve.
Steps to replace insoles in Tari II sandals
- Remove the original insole: Unbuckle the ankle strap and open the side zipper fully. Peel the existing footbed away from the sandal base, starting at the heel. It may be lightly glued; pull slowly to avoid tearing. If the original insole resists, use a hairdryer on low heat for 10 seconds to soften the adhesive.
- Trace and trim the new insole: Place the old insole on top of your new replacement insole and trace its outline with a pen. Cut along the line with sharp scissors. Test-fit the trimmed insole; trim again if it overhangs the sandal edge. Cut slightly outside the line first, then trim in small increments for a snug fit.
- Insert and secure the new insole: Slide the trimmed insole into the sandal, pressing it flat against the base. Close the side zipper and buckle the strap. Walk a few steps to check for slipping or bunching. If the insole shifts during walking, apply a thin strip of double-sided tape to the sandal base before reinserting.
Product facts
- Tari II (Clearance): Full-grain leather upper with premium details, adjustable buckle and elastic gore for accommodating fit, side zipper for easy on and off wear. The side zipper and adjustable buckle let you access the insole area without struggling with tight straps, making the swap simpler.
Tari II (Clearance)
