How to Clean and Maintain D-Trail Men's Minimalist Shoes
By Barefoot Shoes | Minimalist Footwear | Xero Shoes | Published: 2026-10-21
Category: Tips & Care
Keep your D-Trail sandals looking and performing like new with this practical care guide. Learn the right cleaning methods and maintenance tips for webbing and microfiber.
Quick answer
To clean your D-Trail men's minimalist shoes, hand-wash the webbing and microfiber lining with mild soap and water, then air dry away from direct heat. Regular care keeps the recycled straps and custom fit intact.
Why the D-Trail needs special care
The D-Trail uses recycled, quick-drying webbing and a soft microfiber lining. These materials are lightweight and comfortable, but they can trap dirt and sweat if not cleaned regularly. Harsh chemicals or machine washing can damage the webbing's structure and the lining's softness.
The three points of adjustability give you a custom fit, but sand and grit can get into the buckle mechanisms. A simple rinse and gentle scrub after muddy or dusty outings prevents premature wear and keeps the straps moving smoothly.
Step-by-step D-Trail cleaning and maintenance
- Remove loose dirt and debris: Tap the sandals together outdoors or use a soft brush to remove dry mud, sand, and pebbles from the webbing and between the straps. Pay attention to the buckle areas where grit collects. Skipping this step can grind dirt into the microfiber lining during washing.
- Prepare a mild cleaning solution: Mix a small amount of mild laundry detergent or dish soap with cool water in a bowl. Do not use bleach, fabric softener, or harsh cleaners, as they can break down the recycled webbing fibers and the microfiber lining. Harsh chemicals will void the material's quick-drying ability and cause premature fading.
- Hand-wash the straps and lining: Dip a soft cloth or sponge into the soapy water and gently scrub the webbing straps, focusing on high-contact areas. For the microfiber lining, use a damp cloth with a tiny drop of soap and wipe gently. Rinse thoroughly with cool water until all soap is gone. Do not submerge the entire sandal or use a washing machine; the adjustability hardware can rust or jam.
- Air dry away from heat: Shake off excess water and place the sandals in a well-ventilated area out of direct sunlight. Do not use a dryer, radiator, or hair dryer, as heat can warp the straps and shrink the lining. Air drying preserves the custom fit and the integrity of the recycled materials.
- Check and lubricate the adjustability points: Once dry, test all three adjustment points. If a buckle feels stiff, apply a tiny drop of silicone-based lubricant to the moving parts. Wipe away any excess to avoid attracting dirt. Regular lubrication prevents the straps from sticking and extends the life of the closure system.
Product spotlight
- D-Trail - Men: Recycled, quick-drying webbing and soft microfiber lining These materials are lightweight and comfortable but require gentle cleaning to avoid damage and maintain their quick-drying properties.
D-Trail - Men
